-----Original Message-----
From: Phil Ready [...">...]
Sent: Thursday, 4 March 2004 16:06
To: ...
Subject: RE: [blokart] Re: Speedometer for blokart

There is a rectangular magnet available at Dick Smith stores, that with a little scraping of the plastic spoke with a Stanley knife, can be forced in between the spokes with a little 5 second glue added... Like a bought one! Cheers
Phil

-----Original Message-----
From: Simon & Rachel Bartley [...]
Sent: Thursday, 4 March 2004 2:26 p.m.
To: ...
Subject: RE: [blokart] Re: Speedometer for blokart

I glued my magnet onto one of the spokes but it didnt stay on long and got lost on the beach. So I bought a magnet from a hardware store ( ~$3) which had a hole in the centre and used a screw to fix it to a spoke near the rim. It has stayed in place for >2 years now.
Probably the only important thing about placement is that the magnet is aligned with the switch so that the speedo works.
Hope that helps
Simon

—If you want to share pictures, use the calendar, or start a vote
visit http://www.smartgroups.com/groups/blokart

To leave the group, email: ...

EOM

NOTICE – This message and any attached files may contain information that is confidential and/or subject of legal privilege intended only for use by the intended recipient. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, be advised that you have received this message in error and that any dissemination, copying or use of this message or attachment is strictly forbidden, as is the disclosure of the information therein. If you have received this message in error please notify the sender immediately and delete the message.