Originally sent by: nonerd
Use epoxy glue to cement the magnet in place. It should be positioned so that the centre of the magnet passes over the little line marked on the sensor body.----- Original Message -----
From: "Lazzar, Ben B" <...>
To: <...>
Sent: Thursday, March 04, 2004 12:58 PM
Subject: RE: [blokart] Re: Speedometer for blokart
Hi Paul,
Ive used some glue to stick the magnet to the outside of the out thr
plastic
rim, is the the rigth place?
Thanks ben-----Original Message-----
From: Paul [...]
Sent: Thursday, 4 March 2004 07:55
To: ...
Subject: RE: [blokart] Re: Speedometer for blokartHey Ben,
Calibrate front tyre to 960mm this allows for deflection.
cheers
Paul
Team blokart-----Original Message-----
From: Lazzar, Ben B [...">...]
Sent: Thursday, March 04, 2004 8:34 AM
To: ...
Subject: RE: [blokart] Re: Speedometer for blokartHI Guys,
What is the setting that you guys are using for thr smaller tyre
thanks Ben-----Original Message-----
From: dave.mel [...">...]
Sent: Sunday, 29 February 2004 16:32
To: ...
Subject: RE: [blokart] Re: Speedometer for blokartThanks Martin.
Yeah thats the one many of us have, and it will need to be rewired
(extended).Dave
-------Original Message-------
From: ...
Date: 02/29/04 16:12:20
To: ...
Subject: RE: [blokart] Re: Speedometer for blokartHi Denis
I picked up a 'Smart' brand computer from DSE in Botany yesterday – it was
the only brand they had that I
could see. Also $36, it's in a lime green box and the only place the brand
appears is on the actual unit
visible though the window on the front of the box. The Box just says "3 in
1
Cycle Computer – model F9116".
They had about 3 or 4 left yesterday afternoon.According to the instructions it is fully adjustable for wheel
circumference
(in mm increments) from 2999mm
down to 10mm! Beats me how they could fit the magnet onto a wheel that
small
though. Have yet to try fitting
it to the Kart. It will need some form of extension as the wire from
sensor
to head unit is only 800mm long.
Has km/h or MPH speeds – current speed, average speed, max speed (0.0 to
199
9 km/h, or 0 to 110 mph), trip
time, 24hr clock, alarm clock, trip distance, max speed alarm (fully
adjustable up to 199.9 km/h – anyone game
to try THAT?!?), trip time alarm (in case you have an apointment to get
back
for!) and trip distance alarm.
Instructions also specify it is a most advanced model, and they believe it
will become an inseperable friend!Regards
Martin-----Original Message-----
From: Denis & Raewyn Agate [...]
Sent: Saturday, 28 February 2004 10:31
To: ...
Subject: Re: [blokart] Re: Speedometer for blokartDave,
Are yousure the brand was 'Smart'
'DSE only have the 'Liam' model ($36) but I want to make sure I get a
replacement that can do the job. There are no useful specs on it.Cheers
Denis
----- Original Message -----
From: "Dave Pearson" <...>
To: <...>; "Blokart Smartgroup" <...>
Sent: Monday, February 23, 2004 8:53 AM
Subject: [blokart] Re: Speedometer for blokartHi Denis.
Your adaption sounds great. You should take some pics and post it on the
Smartgroup to show others.I knew the limitation of the new Cateye's, so avoided buying that type.
The Smart brand speedo has given me no trouble at all, and I have reached
and recorded speeds of around 65kph. (Very hard to control at that speed!)Dave
-------Original Message-------
From: Denis & Raewyn Agate
Date: 02/22/04 12:18:11
To: ...
Subject: Speedometer for blokartHi Dave,
Interested in your speedo adaptation, as I have been experimenting quite a
bit as well.I am using a 10-year old 'Cateye Mitty 100' but it can't process the
information past 20 pulses/sec which is about 53 km/h.How fast can the Smart brand' register?
(I made up a reed switch and slid it up inside the front fork, then
drilled
a hole up directly into the steering column – so there is no visible
wiring
or sensors at all. It's a very reliable arrangement since it can't get
knocked or wet.)Regards
Denis
2399----- Original Message -----
From: "Dave Pearson" <...>
To: <...>
Sent: Thursday, February 05, 2004 8:24 AM
Subject: Re: [blokart] Cordless speedometer for blokartFor value for money, I think the best bike computer you can get, which
will
calibrate for a Blokart wheel is the "Smart" brand available from Dick
Smith
electronics for $35 ish. I think that this is the type that the Blokart
guys
have modified.
I know of many people that have used this speedo, and if you are not
afraid
of doing a little re-wiring yourself then they work perfectly. I have
tested
the accuracy against my Garmin GPS unit, and it agreed almost perfectly.
The
key is to enter the correct circumference of your tyre at the laden
pressure
There is nothing wrong with the accuracy of the GPS's these days if all
you
want is a speed reading.
I have wired my bike computer through the handlebar piece, so it is
effectively 'cordless'. You just have to remember to disconnect it when
you
pull the handlebar out. Some people have done much better jobs than I
have,
and may have their advice also.
Keep in mind that this is only MY opinion, but hope this helps.
Dave
-------Original Message-------
From: ...
Date: Thursday, February 05, 2004 08:06:21
To: ...
Subject: Re: [blokart] Cordless speedometer for blokartI am also interested in the best type of speedo. Has anyone any
comment on the accuracy of the small GPSs you can buy now?regards
Russell
--
If you want to share pictures, use the calendar, or start a vote
visit http://www.smartgroups.com/groups/blokartTo leave the group, email: ...
--
If you want to share pictures, use the calendar, or start a vote
visit http://www.smartgroups.com/groups/blokartTo leave the group, email: ...
--
If you want to share pictures, use the calendar, or start a vote
visit http://www.smartgroups.com/groups/blokartTo leave the group, email: ...
EOM
NOTICE – This message and any attached files may contain information that
is
confidential and/or subject of legal privilege intended only for use by
the
intended recipient. If you are not the intended recipient or the person
responsible for delivering the message to the intended recipient, be
advised
that you have received this message in error and that any dissemination,
copying or use of this message or attachment is strictly forbidden, as is
the disclosure of the information therein. If you have received this
message in error please notify the sender immediately and delete the
message.--
If you want to share pictures, use the calendar, or start a vote
visit http://www.smartgroups.com/groups/blokartTo leave the group, email: ...
--
If you want to share pictures, use the calendar, or start a vote
visit http://www.smartgroups.com/groups/blokartTo leave the group, email: ...
EOM
NOTICE – This message and any attached files may contain information that
is
confidential and/or subject of legal privilege intended only for use by
the
intended recipient. If you are not the intended recipient or the person
responsible for delivering the message to the intended recipient, be
advised
that you have received this message in error and that any dissemination,
copying or use of this message or attachment is strictly forbidden, as is
the disclosure of the information therein. If you have received this
message in error please notify the sender immediately and delete the
message.--
If you want to share pictures, use the calendar, or start a vote
visit http://www.smartgroups.com/groups/blokartTo leave the group, email: ...
Related
In response to
- Re: Re: Speedometer for blokart Richard Blokart NZ Egroup Manager
Responses
- Re: Re: Speedometer for blokart Richard Blokart NZ Egroup Manager







Digg
reddit
Google Bookmarks
Yahoo! My Web
del.icio.us
StumbleUpon
Newsvine
livejournal
Facebook
BlinkList